 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| pc500.d (3/04) 10 us 858 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 6287 8998 ? ? taiwan 886 2 2698 0228 ? ? hong kong 852 2788 6588 ? ? http://www.pulseeng.com smt power inductors power beads - pa0513 series ( )# ( # ( ! ( ( ( #&4555 ! * +, %-./%&0&, ( )# ( )# mechanical high frequency vrm10 applications current rating: over 70apk inductance range: 210nh to 440nh footprint: 13.5 x 13.0mm max height: 8.0mm max frequency range: up to 1mhz inductance dcr 1,2 inductance 3 saturation current 5 heating 6 part @irated irated 4 (m ? ) @0a dc (a dc ) current number (nh 20%) (a dc ) nominal max (nh 8%) 25c 100c (a) pa0513.211 210 45 0.39 0.50 210 71 64 45 pa0513.261 260 45 0.39 0.50 260 60 55 45 pa0513.321 285 41 0.39 0.50 320 45 41 45 pa0513.441 363 30 0.39 0.50 440 32 30 45 electrical specifications @ 25c ? operating temperature -40c to +130c schematic ( ( ( 1$23! 32 /4/5522! ( 6 ( 6( ( ( ) * ! ( ( 1. the nominal dcr has a tolerance of 8%. this tolerance is guaranteed by design, but is not a manufacturing production test. 2. the maximum dcr is the limit used for manufacturing production test. 3. the nominal inductance has a tolerance of 8%. this tolerance is guaranteed by design, but is not a manufacturing production test. for manufacturing production test, a tolerance of 20% is used. 4. the rated current as listed is either the saturation current or the heating current depending on which value is lower. 5. the saturation current is the current which causes the inductance to drop by 20% at the stated ambient temperatures (25c and 100c). this current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 6. the heating current is the dc current which causes the part temperature to increase by approximately 40c. this current is determined by soldering the component on a typical application pcb, and then applying the current to the device for 30 minutes without any forced air cooling. 7. in high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. to determine the approximate total losses (or temperature rise) for a given application, the coreloss and temperature rise curves can be used. 8. optional tape & reel packaging can be ordered by adding a ? t ? suffix to the part number, (i.e. pa0513.211 t ). notes: dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 weight . . . . . . . . . . .5.7 grams tape & reel . . . . . . . .400/reel 11 pc500.d (3/04) us 858 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 6287 8998 ? ? taiwan 886 2 2698 0228 ? ? hong kong 852 2788 6588 ? ? http://www.pulseeng.com smt power inductors power beads - pa0513 series / ! "##"$$% ""$$ // + &$ '()& * + +"&4-# / 0 / / 0 1 1 01$ 0",-/2"31$$1#-,1" !233 + , - * + -/ . 4 ( # . |
Price & Availability of PA0513211T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |